MEK Woodworks
  • Home
  • Store
  • 52 Boxes
  • Portfolio
  • About
  • Blog
  • Teaching

Box 37

12/10/2015

6 Comments

 
Picture
Picture
This is box 37, which I made at the same time I was making box 36. The have the same dimensions and were made with the same construction techniques, but they clearly are not the same box. I like each of them individually, but I think they're better off as a pair. The underlying familial connection makes their individual beauty shine even brighter. When I first got the notion of making 52 boxes in 52 weeks, I envisioned making individual boxes, but I've grown fond of building a pair of boxes around a few basic design ideas (proportions, use of color, etc.), taking each box in a different direction while letting their bones tie them together quietly. I wonder how many boxes I could do this with. I think three would work nicely. More than that and perhaps the magic is gone.

So, this box. It's cherry, with kingwood pulls. It's a great pairing. Kingwood is in the same genus (dalbergia) as cocobolo rosewood, and African blackwood, so it's no surprise that it compliments cherry so well. The pulls are mortised into the lid. I cut a matching mortise in the box for each pull. When the lid is on the box, the pulls register in the box's mortises and hold the lid in place. It's simple and clean. I like it.

Because this box is so small (1 3/4 in. tall by 2 in. wide by 4 in. long) it was critical that I pick the right piece of cherry for the sides. It needed to be riftsawn with straight, tight grain. The grain on the piece I used is proportioned perfectly for the box's size. I think that matching the grain's proportion to the box's is something that many woodworker's do not think about, which is a shame. Let's say you make this box from curly maple—and I think it would look good in curly maple—the curl would need to be very tight, so that you get a lot of little ripples across the sides. This makes the little box look like it was made from curly maple. Big, rolling curls just wouldn't have the same pop. The box might look splotchy or vaguely figured as a result—and it really look like it was made from curly maple.

The same goes for the fabric I chose. Cherry goes well with blue, so I pulled out my blue fabrics. But the visible area of the bottom and lid are quite small. A fabric with a large pattern would look odd, so I went for one that has a small flower (in blue) all over it. It gives the sense that the fabric was made for a box just this size. A big pattern would suggest that I used a fabric meant for something big, like a quilt, and crammed it into this little box. Perhaps I'm odd for thinking about the fabric I use in this way, but I really do believe it's important that all the details of a box be appropriately proportioned to harmonize with the box's proportions (this, I believe, is also true of all furniture—no matter the size). And my attention to this particular detail is only an example of the level of attention one must pay to the details when designing. Everything must be considered.

OK, let's get random.
  1. I really like this box and it's fraternal twin, box 36. In fact, they might be at the top of my list now. It's an ever evolving list, so things might change, but for now I'm quite fond of them.
  2. We have a very small Christmas tree at work, which sits on a counter that everyone who walks by can see. These boxes, along with boxes 22-24 have been sitting around it like presents. Goofy? Yes, but not as goofy as the ornaments on the tree. All the ornaments are little circles (a two dimension version of the ornaments we all hang on our trees), and each one has a small picture of my face on it. The tree is called the Matty Christmas tree and it gets brought out every year. I did not make this tree. Nor did I make the ornaments.
  3. The top and bottom on this box aren't as proud of the sides as those on box 36. I'm not sure which version I like better.
  4. I cut the mortises for the pulls by hand. I laid them out in pencil, cut them in with a marking knife and cutting gauge and then used chisels to carefully pare away the waste. I then fit the pulls to the mortises. 

Picture
Picture
Picture
6 Comments
Michael
12/10/2015 10:19:38 pm

Matty,

Another nice one!

What a nice design with those pulls.

Keep it up.

Reply
Jerry
12/12/2015 02:58:51 pm

Very nice box. Kingswood and cherry really sing together.
Clever, effective and attractive lid mounting arrangement.
All the best...

Reply
Lou
12/12/2015 07:35:19 pm

Excellent. Like them both

Reply
Jerry
12/18/2015 08:16:04 pm

I just finished watching the final episode of the Shaker bench video you and Mike P. did.
Excellent job. You two just nailed both the video and the bench.
Thanks for your good work.

Reply
Mark
3/21/2017 10:38:34 am

Hey Matt - Love all the boxes, and along with 25 this is one of my favorites (I'm a big fan of the heavily intentional and understated design). Quick question - when you do veneered top and bottom panels in rabbets where you're not clearly painting the sides of the veneered panels (like you do with 25), what are you doing to the sides of these panels? Not leaving bare poplar ply, obviously. Are you edge banding? Using thick enough veneer that all you see poking out of the rabbeted sides is the actual veneer? Something else entirely?

Reply
Matt
3/23/2017 10:55:24 pm

The bottom of box 25 is flush to the bottom edge of the sides and is painted green, too. When the bottom is proud and not painted, I more often than not use solid edge banding (box 1 and 2, for example). If the bottom is proud less than 1/8 in., then I sometimes use shopsawn veneer and without edge banding.

Reply

Your comment will be posted after it is approved.


Leave a Reply.

    Author

    I love furniture design, and smart techniques. This blog is about both.

    Archives

    August 2020
    July 2020
    June 2020
    October 2018
    July 2018
    October 2017
    September 2016
    April 2016
    March 2016
    February 2016
    January 2016
    December 2015
    November 2015
    October 2015
    September 2015
    August 2015
    July 2015
    June 2015
    May 2015
    April 2015

    Categories

    All
    52 Boxes
    Box
    Design
    Kumiko
    Turning

    RSS Feed

  • Home
  • Store
  • 52 Boxes
  • Portfolio
  • About
  • Blog
  • Teaching